2092 Surfacing Primer - Gray (1 Quart)
1 Quart

2092 Surfacing Primer - Gray (1 Quart)

$37.42
21-PRESTEC 2092-Q
  • Description: 2092 is a quick build primer that quickly fills uneven surfaces and major imperfections up to 80 mils. This surfacing primer cures to a harder surface than standard primers and will buff out to a relatively high gloss. It is a low VOC product with virtually no porosity.
  • Special Handling Fee: Hazardous see shipping.
  • Manufacturer: Prestec
  • Availability: In Stock and Available for same day shipping if ordered by 11 am (PST)

Choose Options

Volume
Quart
MEKP Catalyst/Hardener (Included at No Cost)
Please Include Catalyst
Catalyst Not Needed

Product Features

  • Quick build primer with a tougher surface than the sanding primer
  • Low porosity surface for a finish coat or preparation for a top coat
  • Low VOC product
  • Perfect primer for Prestec topcoats or any other surface coatings
  • Relatively high build to 80 mils
  • Will polish to a relatively high gloss surface

Product Applications

  • Metallic primer - Automotive, Tanks
  • In-mold primer for post paint application
  • Pattern surfaces - Tooling board (urethane, epoxy)
  • Wood primer - MDF, Marine grade woods
  • Marine Application
  • Architectural wood surfaces

Application Suggestions

  • Catalyze at 2% with MEKP initiator (10cc/pint)
  • Utilization of HVLP spray gun optimizes finish
  • Air pressure 25-40 PSI
  • Maintain 12-18" distance between gun and surface
  • Optimum temperature of 77º F
  • Start with flash coat (2 mils). Wait 2 minutes then start building coats of 4 mils per pass, up to optimum 24 mils
  • Can build to 24 mils without sagging or cracking
  • Allow full cure (24 hours) prior to sand and polish or topcoat application
There are no reviews for this product!

Related Items

Recently Viewed Items

PayPal Acceptance Mark
Top