2590 Rapid Cut Easy Sanding Primer - Gray, Polyester (1 Gallon)

2590 Rapid Cut Easy Sanding Primer - Gray, Polyester (1 Gallon)

$69.10
21-PRESTEC 2590-G
  • Description: 2590 is a rapid-build, self-leveling, easy sanding polyester primer that is excellent for use in above the waterline marine applications and on marine grade woods. The use of 2590 eliminates the need for PVA or wax surfacing agent when curing.
  • Special Handling Fee: Hazardous see shipping.
  • Manufacturer: Prestec
  • Availability: In Stock and Available for same day shipping if ordered by 11 am (PST)

Choose Options

Volume
Gallon
MEKP Catalyst/Hardener (Included at No Cost)
Please Include Catalyst
Catalyst Not Needed

Product Features

  • Rapid Build Primer
  • Easier Sanding than Sanding Primer
  • Perfect Primer for Prestec Topcoats
  • Virtually No Porosity
  • Relatively High Build to 60 MILS
  • Low VOC Product
  • Self-Leveling
  • Eliminates the Need for PVA or Wax Surfacing Agent 

Product Applications

  • Pattern Surfaces - Tooling Board (Urethane, Epoxy)
  • Substrate Primer for Prestec Top Coats
  • Marine Application- Above the Water Line
  • Post Paint Application Primer
  • Wood Primer- MDF, Marine Grade Woods
  • Architectural Applications

Application Suggestions

  • Mix Contents of Can Thoroughly
  • Optimum Temperature of 77º F
  • Catalyze at 2% with MEKP initiator (20 cc/quart); Mix Well
  • Utilization of HVLP spray gun optimizes finish
  • Tip Size 1.7 - 2.5mm
  • Air pressure 25-40 PSI
  • Allow full cure (24 hours) prior to sand and polish or topcoat application
  • Maintain 12-18" distance between gun and surface 
  • Start with flash coat (2 mils). Wait 2 minutes then start building coats of 4 mils per pass, up to optimum 24 mils
There are no reviews for this product!

Related Items

Recently Viewed Items

PayPal Acceptance Mark

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Top