27x1 - Hi-Gloss Top Coat/Additive- Clear (Polyester)

27x1 - Hi-Gloss Top Coat/Additive- Clear (Polyester)

$0.00
21-PRESTEC 27x1
  • In Stock: Available for same day shipping if ordered by 12 p.m. (PST)
  • Description: 27x1 is a clear top coat that doubles as a gelcoat additive to ensure air cure and a significantly harder surface when fully cured than gelcoat alone. With exceptional UV and scratch resistance, and a super clear glass-like appearance, this top coat is versatile enough to handle every project.
  • Special Handling Fee: This item is considered hazardous in volumes greater than gallon sizes and will include a special handling fee when ordered in individual units with volumes greater than a gallon. If shipped by air, this item will always require a special handling fee, regardless of volume.

Choose Options

Type
Quart- Hardest Clear [+$41.25]
Quart- Flat [+$41.25]
Gallon- Hardest Clear [+$112.00]
Gallon- Flat [+$112.00]

Feature:

Gel Time: 16-20 min @ 77º F

Feature:

Coverage (16 mils): 100 sf/gal

Feature:

Flash Point: 98º F

Feature:

Shelf Life: 6 months @ 68º F

Feature 5

Dust Free Time: 60 min @ 77º
Click for TDS
Click for Catalyst Guide Chart

Product Features
- Eliminate the use of Wax/PVA in Gel Coat when used as Additive
- Air Non-Inhibited Cure 
- Exceptional UV resistance
Buffs to a Super High Gloss Finish
- Refinishes to Original High Gloss Finish
- Super Clear - Glass-Like Appearance
- Scratch resistant
- Practically a Walk-Away Gloss Finish
- Very Low Viscosity
- Low VOC Product  

Product Applications
- Gelcoat Additive for Air-Cure Uninhibited Application
- Top Coat over Pigmented Gel Coat for Clear Depth
- Top Coat over Stains and Primers
Musical Instrument Wood Top Coat
- Automotive Interior Composite Parts Clear Coating
- Architectural Wood Crafts

Application Suggestions
- Mix Contents of Can Thoroughly
Optimum Temperature of 77º F
- Catalyze at 2% with MEKP initiator (20 cc/quart); Mix Well
- Utilization of HVLP spray gun optimizes finish
- Tip Size 1.7 - 2.5mm
- Air pressure 25-40 PSI
- Allow full cure (24 hours) prior to sand and polish or top coat application
- Maintain 12-18" distance between gun and surface 
- Start with flash coat (2 mils). Wait 2 minutes then start building coats of 4 mils per pass, up to optimum 24 mils

There are no reviews for this product!

Related Items

Recently Viewed Items

PayPal Acceptance Mark

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Top