6001 Vinyl Ester Surface Primer - Black (1 Quart)
6001 Vinyl Ester Surface Primer - Black (1 Quart)

6001 Vinyl Ester Surface Primer - Black (1 Quart)

$50.45
21-PRESTEC 6001-Q
  • Description: 6001 is a high build vinyl ester primer that offers high heat distortion and corrosion resistance with low porosity. It is also an FDA approved coating that is effective in a wide range of applications.
  • Special Handling Fee: Hazardous see shipping.
  • Manufacturer: Prestec
  • Availability: +/- 5 Business Day Lead Time

Choose Options

Volume
Quart
MEKP Catalyst/Hardener (Included at No Cost)
Please Include Catalyst
Catalyst Not Needed

Product Features

  • High heat distortion
  • Blister Resistant Marine Application
  • Corrosion Resistant
  • High build 
  • Low Porosity
  • FDA Approvable Coating
  • Sandable
  • Eliminates the need for PVA or Wax Surfacing Agent

Product Applications

  • Below or Above Water Line Marine Repair
  • Elevated Temperature Tooling Surface
  • In-Mold Barrier Coat (Blister Resistant)
  • Corrosion tank/Pipelining
  • Secondary Containment Surface Coating
  • Water Slides/Fiberglass Pools (When used with Lilly-Ram Top Coats, Ty Coat, and Epoxy/Polyester

Application Suggestions

  • Mix Contents of Can Thoroughly
  • The optimum temperature of 77º F 
  • Catalyze at 2% with MEKP initiator (10cc/pint)
  • Utilization of HVLP spray gun optimizes finish 
  • Tip Size 2.5- 4.0mm
  • Air pressure 25-40 PSI
  • Build to 60 MILS without sagging or cracking (multiple passes required)
  • Allow full cure (24 hours) prior to sand and polish or topcoat application
  • Start with a flash coat (2 mils). Wait 2 minutes then start building coats of 4 mils per pass, up to optimum 24 mils
There are no reviews for this product!

Related Items

Recently Viewed Items

PayPal Acceptance Mark
Top