6090 Vinyl Ester Surface Primer - Gray (1 Quart)
1 Quart

6090 Vinyl Ester Surface Primer - Gray (1 Quart)

$52.83
21-PRESTEC 6090-Q
  • Description: Prestec 6090 is a high build vinyl ester primer that offers high heat distortion and excellent corrosion resistance and low porosity. This primer is FDA approved and can be utilized in various applications.
  • Special Handling Fee: Hazardous see shipping.
  • Manufacturer: Prestec
  • Availability: +/- 5 Business Day Lead Time

Choose Options

Volume
Quart
MEKP Catalyst/Hardener (Included at No Cost)
Please Include Catalyst
Catalyst Not Needed

Product Features

  • High heat distortion
  • Blister Resistant Marine Application
  • Corrosion resistant
  • High build
  • Low Porosity
  • FDA Approvable Coating
  • Sandable
  • Eliminates the need for PVA or Wax Surfacing Agent

Product Applications

  • Below or Above Water Line Marine Repair
  • Elevated Temperature Tooling Surface
  • In-Mold Barrier Coat (Blister Resistant)
  • Corrosion tank/Pipelining
  • Secondary Containment Surface Coating
  • Water Slides/Fiberglass Pools (When used with Lilly-Ram Top Coats, Ty Coat, and Epoxy/Polyester)

Application Suggestions

  • Mix contents of the can thoroughly
  • The optimum temperature of 77ºF
  • Catalyze at 2% with MEKP initiator (10cc/pint)
  • Utilization of HVLP spray gun optimizes finish
  • Tip Size 2.5 - 4.0mm
  • Air pressure 25-40 PSI
  • Build to 60 MILS without sagging or cracking (multiple passes required)
  • Allow full cure (24 hours) prior to sand and polish or topcoat application
  • Start with flash coat (2 mils). Wait 2 minutes then start building coats of 4 mils per pass, up to optimum 24 mils
There are no reviews for this product!

Related Items

Recently Viewed Items

PayPal Acceptance Mark
Top