Gel Coat Additives

Gel coat additives change the properties of gel coats to give them greater flexibility in a wider variety of applications.

Sub-Categories
  • Acetone 1090 PG
    Acetone 1090 PG
    Acetone is a powerful solvent used in the composite industry as the standard for cleaning and degreasing. It will dissolve and remove epoxy, polyester, and vinyl ester resin from tools, brushes, and surfaces. It will also effectively remove grease and wax for surface preparation prior to bonding or repair. Available in 5 gallons, 1 gallon, and 1 quart.
  • Hi-Gloss Topcoat/Additive - Clear
    Hi-Gloss Topcoat/Additive - Clear
    Prestec 27x1 is a clear top coat that doubles as a gel coat additive to ensure air cure and a significantly harder surface when fully cured than gel coat alone.
  • MEKP Resin/Gel Coat Hardener
    MEKP Resin/Gel Coat Hardener
    Methyl Ethyl Ketone Peroxide (MEKP) is the industry standard catalyst and is required with all polyester resins, gel coats, and vinyl ester resins. It is required in different concentrations as defined for each resin product.
  • Methyl Ethyl Ketone (MEK)
    Methyl Ethyl Ketone (MEK)
    Methyl Ethyl Ketone (MEK) is an effective solvent in gel coats that allows them to spray and level significantly better than acetone in spraying applications.
  • Styrene Monomer
    Styrene Monomer
    Styrene can be added to gel coats and resins in order to thin them down for various applications.
Products (Total Items: 25)
Sort by
Surfacing Agent
$5.18
Webbing Solution (1 Pint)
Test Short description
$23.02
Styrene Monomer (1 Pint)
Styrene can be added to gel coats and resins in order to thin them down for various applications.
$16.85
27x1 Hi-Gloss Topcoat/Additive - Clear, Polyester (1 Gallon)
27x1 is a clear top coat that doubles as a gel coat additive to ensure air cure and a significantly harder surface when fully cured than gel coat alone.
$138.13
Acetone (5 Gallon Pail)
Acetone is a powerful solvent used in the composite industry as the standard for cleaning and degreasing.
$62.10
MEKP Resin/Gel Coat Hardener (1 Gallon)
Methyl Ethyl Ketone Peroxide (MEKP) is the industry standard catalyst and is required with all polyester resins, gel coats, and vinyl ester resins. It is required in different concentrations as defined for each resin product.
$35.20
Methyl Ethyl Ketone - MEK (5 Gallon Pail)
$124.66
Acetone (1 Gallon)
Acetone is a powerful solvent used in the composite industry as the standard for cleaning and degreasing.
$15.40
Acetone (1 Quart)
Acetone is a powerful solvent used in the composite industry as the standard for cleaning and degreasing.
$9.63
Methyl Ethyl Ketone - MEK (1 Gallon)
$28.91
Methyl Ethyl Ketone - MEK (1 Quart)
$12.00
Methyl Ethyl Ketone - MEK (1 Pint)
$8.00
Webbing Solution (1 Gallon)
Test Short description
$61.40
Webbing Solution (1 Quart)
Test Short description
$30.70
Styrene Monomer (1 Gallon)
Styrene can be added to gel coats and resins in order to thin them down for various applications.
$39.78
Styrene Monomer (1 Quart)
Styrene can be added to gel coats and resins in order to thin them down for various applications.
$26.35
More results: 1 2 Next Page View All
PayPal Acceptance Mark

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Top