P-17 High Heat Resistant Rigid Filler (1 Quart)
P-17 High Heat Resistant Rigid Filler (1 Quart)

P-17 High Heat Resistant Rigid Filler (1 Quart)

$55.80
F/P-17-Q
  • Availability: 2 Week Lead Time
  • Description: P-17 high heat resistant filler set-fast system has uses in aerospace, aircraft, automotive, tooling, manufacturing, and final fabrication where potential expoure to elevated temperature up to 446°F have to be tolerated either for short term or continuous periods. P-17 offers the user a smooth workable paste with set-fast cure to expedite those applicatios for repair or finish. P-17 can be applied with a squeegee, spatula, or flat tool. The cured material can be finished by mechanical sanding, grinding scraping, etc., to a heather edge. This filler has excellent adhesive and bond strength to fiberglass, SMC, BMC, RIM, FRP, epoxy, graphite and Kevlar composites as well as aluminum, plaster and other substrates. P-17 high heat resistant filler when cured and finished accepts virtually all types of coatings and decorative film without any blush or discoloration. Manufactured by Axson USA, Inc.
  • Special Handling Fee: This item is considered hazardous in volumes greater than gallon sizes and will include a special handling fee when ordered in individual units with volumes greater than a gallon. BPO Hardener is considered a hazardous material in any volume and can only be shipped by ground.
  • Manufacturer: Axson USA, Inc.
  • SPECIAL NOTE: **SOLD IN MULTIPLES OF 6; MOQ OF 6**

Choose Options

Volume
Quart (Black) + 1 oz. BPO Hardener (+$5.56)
Quart (White) + 1 oz. BPO Hardener
BPO Hardener Color help
White
Red
Black

Typical Applications:
  • Aircraft interior panels
  • FRP panels-filling cloth imprint
  • Nose cone porosity
  • Edge filling on honeycomb
  • Changes & repairs to vacuum form molds
  • Drill fixtures
  • Potting Bushings
  • Gelcoat repairs on production molds
  • SMC mold porosity in molded parts
Handling Characteristics @ 77°F
Mix Ratio (parts by weight or volume) 100R/2H
Mixed Viscosity Thixotropic Paste
Mixed Consistency Creamy Paste
Specific Gravity 1.2 g/cc
Work Life (50g mass) 5-7 minutes
Finish Schedule 15 minutes
Hardness 80 Shore D
Storage Requirement 40°F - 80°F
Typical Physical Properties
Tensile Strength (ASTM D-638.91) 4074 psi
Tensile Elongation (ASTM D-638.91) 1.2%
Flexural Strength (ASTM D-790.92) 7080 psi
Compression Strength (ASTM D-695.91) 8992 psi
Shrinkage (Cast Bar) (ASTM D-2566.86) 0.00982 in/in
Coefficient of Linear Thermal Expansion (TMA) (ppm/°F) 25
Water Absorption after 24 hours immersion in distilled water (ASTM D-570) 0.149%

**Note: This product is intended to be used as supplied. Do not thicken or thin this product as altering the formulation may lower physical properties.**
There are no reviews for this product!

Related Items

Recently Viewed Items

PayPal Acceptance Mark

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Top